Very often our computers appears to be some very serious problems, is only frightens ourselves, that is, Bobo thread, move the little things moving jumpers. Common cold sweat you out of hard disk space does not bootstrap There are two main problems:
System does not recognize the hard drive
Such failure is most common self-test to complete the boot prompt the following error:
HDD controller failure Press F1 to Resume
The E text refers to "the hard disk does not start," and even sometimes with CMOS in the automatic monitoring function can not find the existence of the hard disk. When the above information, it should focus first check the power cord and hard drive, interface cable for damage, loose, loose contact, reverse such phenomena, in addition to the common reason is that the main hard disk jumper is set wrong from the .
Inspection, control methods: re-plug hard drive power cable, data cable, or plug the data cable to change IDE port to replace the other tests.
CMOS error caused by failure
Power displays the following information:
Drive not reday error Insert Boot Diskette in A
Press any key when ready ...
The above error, and more are CMOS settings wrong or because of insufficient power supply causing CMOS CMOS caused by loss of information.
CMOS settings right or not directly affect the normal use of the hard disk. When the hard disk type error, write error occurs often, sometimes, simply can not boot the system. Such as CMOS type of hard disk drives smaller than the actual capacity of the drive behind the sector will not be able to read and write.
Inspection, troubleshooting: reset the CMOS reset or discharge data.
If not the above two reasons, then most of your hard drive is "hanging", and want to save trouble put it scrapped off, for it blocks the new hard drive. If you have important information on the hard drive, or you have a strong practical desire, please Follow me.